-->
 
  
 

WELDING GUNS

One of the most important points with any spot welder is the Weight, Easy of Use, and accessibility of the welding gun. Hirane has three options for the customer to choose from:

  • AS116 Series Air Operated Double Sided Gun

  • 900 Series Air Operated Double Sided Gun

  • AS036 Mechanical Gun

AS116 - Air Operated Double Sided Gun

 

  • Lightweight air operated double sided gun for panel replacement
  • Compact gun & small arms to reach tight areas
  • Pneumatic single piston action gun, producing up to 264lbs. / 119dan tip / electrode force for normal steels.
  • Electricity connects directly to arms and tips preventing any electricity passing through working parts of gun.
  • Three Optional arms available are- 150mm / 6in Arm (AS166), 450mm U-Arm (AS190) & 700mm / 27in U-Arm (AS164)

900 SERIES - Air Operated Double Sided Gun

 






  • Car manufacturers are using new steels i.e. Boron Ultra High Strength; these steels require higher electrode force. The Hirane 900 series gun can produce up to 730lb. / 330 Dan tip pressure with a 90psi air supply.
  • Because of the direct piston action design the Hirane 900 series gun can maintain the high tip / electrode force on all arms up to 700mm / 28" arm.
  • The gun is delivered with both Domed & Flat electrode profiles to produce factory type welds.
  • Arms are available with insulated sleeving / coating to prevent shorting against vehicle body.
  • By removing one pin, the airgun body arms can be changed in seconds without the use of any tools.
  • Electrodes are automatically self-aligning.
  • The gun is supplied standard with replaceable Capped Electrodes, cost effective and maintaince free way of maintaining electrodes in good condition.
  • Options of arms available, Standard arm, 450mm U-Arm, 700mm U-arm & Wheel Arch Arm.
  • One finger control by using the micro switch on cable, the electrode will close and after a time delay it will automatically start the weld cycle
  • With use of the optional 900 series spring balancer the airgun fitted with 700mm / 28" arm, the gun still weighs less than 9lb.

FEATURES

  • FASTS CHANGING OF ARMS remove pin from airgun to release arm, no tools required & only takes seconds to change arm

  • SCREW HANDLE up to eight positions. Handle can be screwed into U-Arms to assist operator to hold arm

  • REPLACEABLE ELECTRODE CAPS once profile is worn on electrode

  • DOUBLE PISTON produces up to 730Lb (330Dan)-electrode pressure / force on ALL arms

AS942 Capped Electrode Removal

Standard Arm

AS920 450mm U-ARM
AS930 700mm U-ARM

AS910 WHEEL ARCH ARM

AS036 MECHANICAL DOUBLE SIDED GUN

  • The AS036 Mechanical Gun is a lightweight lever action gun, anufactured from alloy.
  • Ideal for tight to reach area's like radiator supports etc.
  • Can be used on all Hirane models.

REPLACEABLE ELECTRODE CAPS

Once profile is worn on electrode, simply twist off and replace cap.

Products -Spot Welders
Products - Welding Guns
Products - Dent Pullers
 
 
 
Contact Us
About Us
Home
Copyright 2006. J. Lee Automotive Industry Equipment. All Rights Reserved. Webmaster  Email: info@usaspotwelding.com