Welds Hi-Tensile Steel

• Pulse Mig results in an economical low voltage operation
• The heat influence against the panel will be at a minimum
• Super welding will be available just by set up of the material and the thickness of the panel
• Inverter system cosumes electricity- just one third of ordinary welders
• Arc bar welding without gas will be available by changing the mode
• The weight is 9.3 kgs, Easy to carrry
  
  Technical Specifications
  
  MIG 2050 Pulse Synergic
  Maximum Input Power 2.8 KVA
  Input Voltage 200 V
  MIG Brazing Wire 5kg 8mm Efficiecy 0.9
  
  - Frequency 50/60 Hz
  - Range 15-200 Amp
  - Duty Cycle 100% 110
  - 60% 140
  - 35% 185
  - Fuse (100%) 15 Amp
  - Protection Class IP 23
  - Standard EN 60674-1 EN 50199
  - Weight 9.3 kg
  - Dimensions W xL xH 16 x 41 x 38cm
  - Wire dimension 0.6- 0.8- 1.0
  - Wire Type Aluminium,Stainless steel, Soft steel,
  Cu-S13, Flux-Core
  
  
  Control Panel
  
  Simple Operation! Good welding will be
  ensured by setting up of panel material
  and thickness
  
  
  A. Lamps
  A1 Yellow : short of supply voltage/
  warning for over heat
  A2 Green : power indicator works well
  A3 Green : Mig/Mag mode w/stanard
  Torch
  A4 Green : Mag/Mag mode w/the Torch
  for Aluminium
  A5 Green : Pulse on/off display
  
  B. Synergic dial
  NMA : Arc bar Welding
  MG/ MAN : Manual operation
  
  C. Digital Display
  D. Potentiometer Dial- It allows switching welding mode from short-arc to pulsed arc for spool gun
  E. Potentiometer ELECTRONIC INDUCTANCE
  adjusts welding current and wire speed pulsed arc in MIG
  F. Wire Load Button
  By keeping it pressed,you will be able to load the
  wire without gas flow and without welding tension
  G. On/Off Speed Button
  H. Mig-Pulse button
  
  
  

Click Photo
to Enlarge

Click Photo
to Enlarge

Click Photo
to Enlarge

Click Photo
to Enlarge